Moersch SE2 WARM - 1L Bekijk groter

Moersch SE2 WARM - 1L

Papierontwikkelaar te gebruiken met alle papiertypes maar bij voorkeur RC of PE-papieren voor een neutrale tot warme toon. Langere ontwikkeltijden leveren een groene toon. Concentraat levert tussen de 10 en 26 liter working solution.

Universal developer for all paper emulsion types. The developer works very quickly with a development time of around 60 to 75 seconds at 20°C using the normal 1+9 dilution. This dilution, however, is only recommended for processing Resin Coated (RC or PE) papers or for impatient Fibre Based (FB or Baryta) workers. It produces a neutral to warm tone image which is highly dependent upon the particular paper being used; with Cold Tone papers or those with developer accelerators within the paper itself, the tone is neutral to warm with a tendency towards the green. Warm Tone papers have brownish nuances if developed for not longer than 70 seconds. Above this and over 90 seconds the image becomes markedly more green. A light selenium toning afterwards (diluted to 1+50 to 1+200) will remove the greens and make the image tone somewhat cooler and release the deepest blacks. 

Due to the very high capacity of the developer the optimal dilution is 1+20 and a developing time of 2 minutes at 20°C is recommended. With greater dilutions increase the developing time.  

The working solution is highly stable and keeps in fully filled containers for a number of weeks.

Dilution: 1+9 to 1+25

Moersch Photo Chemie

NIEUW PRODUCT

€ 15,99 incl. btw

Verpakking1 x Moersch SE2 Warm papierontwikkelaar 1 LITER

Geen klantenbeoordelingen op dit moment.

Schrijf uw recensie

Moersch SE2 WARM - 1L