• Disponible pour toutes vos questions
  • Shopping dans une entreprise familiale belge
  • Grande sélection, meilleurs prix
  • Disponible pour toutes vos questions
  • Shopping dans une entreprise familiale belge

Votre panier est vide.

Commentaires (0)

Ecrire le premier avis
Aucun commentaire

Kaiser Fototechnik

Kaiser System-V VP 9005 Agrandisseur N&B (jusqu'au format de film 6x9 cm)

Ecrire le premier avis
| 4540
€ 1873,99

Choisissez votre couleur:

NoColour

Choisissez votre taille:

1Size

Livraison 2-3 Jours ouvré

L'agrandisseur Kaiser VP 9005 B&W est livré avec le support négatif, masque 6x7cm, une lampe opale de 75W, deux bagues porte-objectif et un capot anti-poussière. Un objectif d'agrandissement n'est pas inclus et est vendu séparément.

This VP 9005 B&W enlarger is part of Kaiser's top-of-the-line System-V enlarger series which are still built in Germany. The VP 9005 condensor enlarger with B&W head is suitable for printing black-and-white negatives up to size 6x9cm (2.4 x 3.5 inch) and is compatible with lenses up to a focal length of 105mm.

This B&W enlarger is equipped with a tiltable lens stage with spirit level and red filter, which allows you to correct any distortion based on the Scheimpflug principle. The specific design of the lens attachment allows you to quickly changes lenses. Precise focussing is possible thanks to the additional fine focusing drive mechanism. 

Negatives are easily loaded into the removable compound negative carrier of which the top plate is made from anti-newton glass and the bottom plate is optical flat glass for the best performance. The negative carrier has interchangeable film inserts and adjustable masking strips and film stops and is fitted with grid pins so no need to purchase any separate negative carriers anymore if you want to work with different film formats. The double condensor system covers both 35mm and medium format films, so no change of condensors is necessary when printing.

The VP 9005 also comes with a filter holder for square and framed multigrade filters, which can be taken out and adjusted in height together with the diffusor plate for integral metering.

The enlarger has a baseboard of size 600x500x32 mm (23.6x19.7x1.3 inch) and is fitted with a 75W opal lamp (E27). Height adjustments goes easily with the hand-crank operated friction drive on plastic bearings. The design of the enlarger allows both floor and wall projection. If needed, the enlarger can also be used as a copy stand for film scanning. Additional accessoires are however needed in that case.

Most important features:

  • For film formats up to 6x9 cm and lenses up to 105mm focal length;

  • Removable compound negative carrier with interchangeable inserts, adjustable masking strips and grid pins;

  • Wall and floor projection, tiltable lens stage, distortion correction on Scheimpflug principle;

  • White-light lever for simultaneous swinging in and out of filters, with control light;

  • Best possible light distribution due to special diffusor plate;

  • Exchangeable double condenser system;

  • UV and IR filter integrated;

  • Filter holder for square and framed multigrade filters;

  • Built-in red filter;

  • Quick-change attachment for enlarging lenses;

  • Height adjustment by hand-crank operated friction drive with weight compensation by roll-off spring mechanism;

  • Manual fine focusing.

Technical details:

  • Baseboard size: 500x600x32 mm (19.7x26.7x1.3 inch);

  • Lamp: opal lamp 75 W, E 27 socket;

  • Power cord: approx. 2.50m (8 foot 2 inch);

  • Filter drawer: 85x85 mm (3.3 x 3.3 inch);

  • Column (HxWxD): approx. 35x70x1000 mm (1.4x2.8x39.4 inch);

  • Distance between optical axis and column base: approx. 220 mm (8.7 inch);

  • Can be converted into a copy stand with additional accessories.

Commentaires (0)

Ecrire le premier avis
Aucun commentaire