- Available for all your questions
- Shopping at a Belgian family-run business
- Large selection, best prices
- Available for all your questions
- Shopping at a Belgian family-run business
Reviews (0)
Write the first reviewThe CineStill CS-LITE+ is a universal, compact light source, specially designed for scanning archival films with any digital camera. Balanced light output with optimised colour separation, specially calibrated for film! Most light sources currently available for scanning films are not designed for that purpose and, even with a high CRI, fail to do the job due to a lack of control and generic design. The CS-LITE+ uses ultra-bright single-band LEDs, powered by a standard 5V/1.5A USB power supply. Using proprietary SpectraCOLOR™ technology, developed over many years, the narrow-band light is then converted and shaped into separate ultra-narrow-band multispectral wavelengths – not achievable with traditional LED technology – specifically calibrated to convert the colour layers of film into the three colour channels of a digital raw file, without colour contamination or crosstalk, using a standard Bayer pattern (or similar) three-colour sensor. This allows your digital sensor to see negative film as it was intended, resulting in the purest, most true-to-life film-to-digital conversions possible. The CS-LITE+ can be set to three different modes using the included CS-LiteBrite+ light collimation sheets and two different colour calibration sheets.
S-LITE+ Color Modes:Color Negative Mode (Color Negative Calibration Sheet)This mode is designed to reduce the orange mask present in color negatives to allow for more neutral scans resulting in superior color separation with less noise due to excessive gain produced when shifting color temperature below 2800K in a raw file.Place the included Color Negative Calibration Sheet (blue color) beneath the two CS-LiteBrite+ sheets (remove protective film from both sides of both sheets before use), aligning the notched corner to the upper right of the light.Cool/White Light Mode (Maximum Output For B&W Film Scanning)Standard cool white light for scanning black and white negatives.Place the included two CS-LiteBrite+ sheets (remove protective film from both sides of both sheets before use) directly on the light source aligning the notched corner to the upper right of the light. This mode can also be used to scan color negative film for post-processing workflows developed for white-light scanning and may also be helpful for images taken on slide film under incandescent light.
Warm Light Mode (Color Positive Calibration Sheet for Slide Film Scanning)Slide film is designed to be viewed with a tungsten balanced backlight. To accomplish this, place the included Color Positive Calibration Sheet (yellow color) beneath the two CS-LiteBrite+ sheets (remove protective film from both sides of both sheets before use) aligning the notched corner to the upper right of the light. This setting also produces even richer tones on slides and enhanced color separation for more control when editing.
. 2× CS-LiteBrite+ light collimation foils
• 1× colour negative calibration foil (blue)
• 1× colour positive calibration foil (yellow)
• 1× CS-LiteMask universal film holder mask
• 1× printed instructions
• 4× rubber feet
Reviews (0)
Write the first reviewKeep me posted
Leave your email address. We will notify you as soon as this product is back in stock.
- Product: Cinestill Cs-Lite+ Spectracolor Light Source
- Size: